遮天辰东小说笔趣阁,古风君子以泽,官场小说排行榜

Home > Application > CNC Machine Tool CNC Machine Tool

GSK 988T CNC System Uses on the Overhaul Upgrading and Reforming of Harting T42 from Shanxi Company

Customer Requirement:

There is deviation of the center height between turret and spindle; tool-change position of the servo turret does not exact; the sealing of shielding cover for each linear axis is damaged; both CNC system and tube are aged.
It is necessary to change the configured CNC system, recover the precision of the machine tool, change the aged components and reinstall the automatic chip-remover and the pneumatic door.

Reforming Project:

Adopting the GSK 988T CNC system to configure the servo motor with servo drive to perform the reformation.
To guarantee that the center height is equal of spindle and turret by adjusting the spindle basement and turret.
Overhaul the turret and change into the servo motor made by GSK, and then drive the rotation of the turret therefore; slightly adjust the position of detection switch and guarantee the precision of the tool-change position.
Changing the seal of the cover of each axis for protecting the screw rod and guiding of it.
Adding the chain-plate automatic cooling chip-removing system, the chip-remover is installed under the cover of the whole machine, and the chips will be come out from the right of the machine tool.
Adding the pneumatic door with the in-position detecting signal of switch door.
Check the chuck, hydraulic, lubrication, cooling and pneumatic system and change the aged components.
Redesign the schematic diagram of electric control of the machine tool, change the electric control and spare parts and rewiring.

Application Effect:

Recover the precision and the overall functions of the machine tool and stably operate it.
To meet the component machining requirements of customers.

天天干夜啪-天天干夜夜-天天干夜夜爱-天天干夜夜叭-天天干夜夜操