怎样写网络小说,欢乐颂小说在线阅读,大主宰之灵路天蚕土豆

Home > Application > robots > Polishing Polishing

Application of GSK RB08 Robot on Radiator Polishing of One Company

Customer Requirement:

Using the robot replaces the manual work, of which the artificial work can install 16 pieces of polishing workpiece once.
The maximum deformation value on the surface of workpiece polishing: <0.1mm.
Using the 80# coated abrasive to polish the surface of workpiece that is disordered, and its beat is less than 12S/workpiece.

Troubleshooting:

Set the dual-station, the loading/unloading setting of manual work is out of the range of the robot operation, which can be achieved that the robot polishing and loading/unloading of manual work can be performed at the same time, so that it can be guaranteed the safety of operators.
It is considered the beat and efficiency that uses the whole 6~8 workpiece to polish, and the manual loading/unloading station will be performed the loading/unloading and inspection at the same time.
The workpiece position fixture is set the position pin, and carried out the rapid change of different fixtures of machines and then improved the efficiency.

Application Effect:

The robot replaces the manual work that can be continuously operated for 24 hours and stably completed the working tasks.
The polishing industry is danger, especially in polishing the dust, for example, abrasive of sand paper or sand stone, dust of metal. It is harmful to the workers’ health, and it can be avoided this accident by using the robot as well.
Using the robot to replace the manual performing the polishing, workpiece polishing on the surface is good consistency and its quality is stable; it will not affect the technical proficiency and working attitude.
Experts in polishing believe that the application of robots in the casting industry is the trend of The Times, which is not only the promotion of the market, but also the requirement of technological upgrading.

天天干夜啪-天天干夜夜-天天干夜夜爱-天天干夜夜叭-天天干夜夜操